Table of Contents
Advertisement
Warning/indicator lamp
State
Red warning lamps
STOP
On, associated with
another warning lamp
and accompanied
by a message in the
screen.
Engine coolant
On, with the needle in
temperature and
the red zone.
level
Flashing.
Engine oil pressure
On while driving.
and temperature
On, even though the
level is correct.
Battery charge
On.
Flashing.
On, despite the
checks.
Cause
Major faults linked with the "Brake
fluid level", "Engine oil pressure
and temperature", "Coolant
temperature", "Electronic brake
force distribution" and "Power
steering" warning lamps.
An abnormal increase in
temperature.
A drop in the engine coolant level. Contact a CITROËN dealer or a qualified workshop.
Insufficient pressure or excessive
temperature.
A major fault.
A fault in the charging circuit.
Active functions set to standby
(economy mode).
A fault with the ignition or
injection system.
https://www.automotive-manuals.net/
Action/Observations
You must stop as soon as it is safe to do so.
Park, switch off the ignition and call a CITROËN
dealer or qualified workshop.
Park and switch off the ignition, then allow to cool down.
Check the level visually.
Park and switch off the ignition then allow to cool down.
Check the level visually.
For more information on checking levels, refer to the corresponding section.
Have it checked by a CITROËN dealer or a qualified
workshop.
Check the battery terminals.
For more information on the battery, refer to the corresponding section.
For more information on the battery, refer to the
corresponding section.
Have it checked by a CITROËN dealer or a qualified
workshop.
Instruments
1
9
- Quick Links:
- Table of Contents
- Changing a Fuse
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the BERLINGO MULTISPACE and is the answer not in the manual?
Questions and answers
How do I link radio with phone
To link your phone to the radio in a Citroën Berlingo Multispace, follow these steps:
1. Ensure Bluetooth is turned on in your phone.
2. Access the menu on the car’s radio system.
3. Navigate to the "Phone" option and press OK.
4. Select "Bluetooth Configuration."
5. Choose "Connect/Disconnect Equipment."
6. Select the Bluetooth radio option when it appears.
7. Enter the PIN displayed on the screen (e.g., 0000).
8. Confirm the pairing request on both the car system and your phone.
9. If prompted, allow contacts and favorites sync.
Your phone should now be connected to the car’s Bluetooth system.
This answer is automatically generated