Access
The electrical functions of the electric windows
are deactivated:
-
approximately 45 seconds after the ignition
is switched off,
-
after one of the front doors is opened, if the
ignition is off.
Safety anti-pinch
When the window rises and meets an obstacle,
it stops and partially lowers again.
Reinitialisation
Following reconnection of the battery, or in the
event of a malfunction, the anti-pinch function
must be reinitialised.
F Bring the window down completely, then
bring it back up. It will go up by a few
centimetres with each press. Repeat the
operation until the window is fully closed.
F Hold the switch pressed for at least one
second after reaching the window closed
position.
The safety anti-pinch does not operate while
doing this.
36
In the event of contact (pinching) during
operation of the windows, you must
reverse the movement of the window. To
do this, press the switch concerned.
When operating the passenger electric
window switches, the driver must ensure
that no one is preventing correct closing of
the windows.
The driver must ensure that the
passengers use the electric windows
correctly.
Be aware of children when operating the
windows.
After several consecutive attempts to
close/open the windows using the electric
windows control, a protection system
engages, which only allows for the
windows to be closed. After closing, wait
approximately 40 minutes. After this time,
the control will be operational again.
https://www.automotive-manuals.net/
Need help?
Do you have a question about the BERLINGO MULTISPACE and is the answer not in the manual?