CITROEN BERLINGO MULTISPACE Handbook page 109

F Move the gear selector to R.
Only engage it when the vehicle is
stationary.
Neutral
Engaging neutral
F Move the gear selector to N. If the vehicle
is moving, do not select this position even
momentarily.
Automatic mode
Switching to automatic mode
F Move the gear selector to A.
The gearbox then operates in automatic mode,
without any intervention on your part.
It continuously selects the most suitable gear
taking account of:
- style of driving,
- road profile,
- optimisation of fuel consumption.
Manual mode
Switching to manual mode
F Move the gear selector to M.
Changing gear
F Press the "+" paddle to change up.
F Press the "-" paddle to change down.
- When the vehicle is statinary, or at low
speed (approaching a stop, for example),
the gearbox changes down automatically
into 1 st gear.
- It is not necessary to completely release the
accelerator pedal during gear changes.
- The gear change commands are carried out
only if the engine speed permits.
- For safety reasons, depending on the
engine speed, downward gear changes may
be made automatically.
If the engine speed is high (sharp
acceleration), the next gear will not be
engaged without the driver changing gear
manually.
https://www.automotive-manuals.net/
Acceleration
For optimum acceleration (for example, when
overtaking another vehicle), simply press
the accelerator pedal firmly past the point of
resistance at the end of its travel.
Vehicle stationary, engine
running
In the event of a prolonged stop with the engine
running, the gearbox automatically returns to
neutral N.
Stopping the vehicle
F Before stopping the engine, move the gear
selector to position N.
In all cases, the parking brake must be applied.
Ensure that the parking brake warning lamp
lights up on the instrument panel.
Before doing any work under the bonnet
ensure that the gear selector is in
neutral N.
Driving
6
107