Defective Zone Bypass - Mongoose M8 Owner's Operation & Installation Manual

Vehicle alarm system
Table of Contents

Advertisement

ARMING (& LOCKING*)
Turn off the engine, exit the vehicle and close all doors, bonnet and boot.
REMOTE- Press and release the
once, the
vehicle's parking lights will flash once, the doors will lock (optional), and the dash mounted LED will begin
to slow flash.
WARNING! Excessive pressure on the transmitter buttons will damage the internal components on the
circuit board. All that is required is a light push to the button.

DEFECTIVE ZONE BYPASS

1. If the siren "chirped" three times when
has been left open. Closing the open circuit will correct the problem.
2. If the siren "chirped" three times, sometime after arming, the exclusive delayed domelight learn
circuit has been programmed and the system detected a open entry point after the learned delay
expired. Again, closing the circuit will correct the problem and you do not need to disarm the system to
make the correction.
LAST DOOR AUTO ARM *PROGRAMABLE
Turn off the engine, exit the vehicle and close all doors, bonnet and boot.
The Dash LED will begin to flash rapidly, indicating that the system is automatically (passive) arming.
Passive arming will not begin till after all doors and boot are closed.
In 30 seconds, you will hear a single short
lights will flash once indicating the system is now armed. The LED will begin to flash slowly indicating the
system is fully armed.
Opening a door will suspend the automatic arming sequence.
If you wish to arm the system immediately, simply press the ARM button on the keychain transmitter.
OPERATING YOUR VEHICLE SECURITY SYSTEM
'A
rm (Lock)
'
button on the keychain transmitter. The siren will "chirp"
'
'
Armed
, then one of the entry points (bonnet, boot, doors)
"
"
chirp
from the siren and the vehicle and the vehicle parking

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M8 and is the answer not in the manual?

This manual is also suitable for:

M824

Table of Contents