Compressor Mounting; Caster Maintenance - Denso Movincool CLIMATE PRO K60 Service Manual

Compressor Mounting

1. Install the four (4) cushions and collars on the bolts .
2. Mount the compressor in the unit.
3. Insert the four (4) nuts and fasten at the torque of 8.3 ± 2.1 ft·lbf (11.3 ± 2.9 N·m)
Nut (4)
Collar (4)
Cushion (4)

Caster Maintenance

Lubricate bearings in caster as needed with standard bearing grease using the zerk fitting.
Check if casters roll and swivel freely. Remove any build-up dirt or dust.
89