Compressor Mounting; Caster Maintenance - Denso MOVINCOOL Climate pro k18 Service Manual

Compressor Mounting

1. Install the three (3) cushions on the bolts .
2. Mount the compressor in the unit.
3. Insert the three (3) nuts and fasten at the torque of 8.3 ± 2.1 ft·lbf (11.3 ± 2.9 N·m)
Nut (3)
Cushion (3)

Caster Maintenance

Lubricate bearings in caster as needed with standard bearing grease using the zerk fitting.
Check if casters roll and swivel freely. Remove any build-up dirt or dust.
53