Denso Movincool CLIMATE PRO K60 Service Manual page 30

Removal of Panels
15. Remove the four (4) M4 x L10 screws from the top, and the four (4) M6 x L12 screws from the
bottom of the upper rear panel. Next remove the upper rear panel.
Upper Rear Panel
Screw (4)
M6 x L12
16. Remove the four (4) wires of the antenna from the communication module as shown.
Screw (4)
M4 x L10
Communication Module
Communication Module
Wire of Antenna (4)
30