Denso Movincool CLIMATE PRO K60 Service Manual page 53

Removal of Electrical Parts
2. Relay Board
a) Remove the six (6) supports with needle-nose pliers and remove relay board from the control
box.
Note:
Be careful not to damage the relay board.
b) Disconnect the twelve (12) connectors from the relay board.
CN01 (Black)
To Terminal Block 1
(T for Power)
CN02 (White)
To Terminal Block 1
(R for Power)
Supports (6)
CN21 (Red, Blue, Brown, Orange, White)
To Evaporator Fan Motor
CN30 (White, Black, Red)
To Control Board
53
Default Setting
Dip switch
1 2 3 4 5 6
CN14 (Yellow, Brown, Blue, Orange)
To Drain Switch, Condensate Pump
CN13 (Black)
To High Pressure Switch
CN10 (Black)
To RTS, CTS1 Thermistors
CN15 (White, Yellow, Brown)
To Terminal Block 2
(AL-1, AL-2, FA-1, FA-2 for Alarm Device)
CN24 (White, Black)
To Terminal Block 2
(OS1, OS2, for Warning Device)
CN22 (Black Brown)
To Relay for Condenser Fan Motor
RL01-3 (Black)
To Terminal Block
(T for Power)
RL01-4 (Yellow)
To Relay for Compressor
ON
OFF