Denso Movincool CLIMATE PRO K60 Service Manual page 66

Removal of Blower Assembly
4. Loosen the set screw of the condenser fan with a hex key.
Note:
When reinstalling the condenser fan, fasten the set screw at the torque of 10 ± 1 ft·lbf (14 ± 1.4 N·m).
5. Remove the condenser fan.
6. Loosen the set screw with a hex key and remove the extension shaft.
Note:
When reinstalling the extension shaft, fasten the set screw at the torque of 6 ± 0.6 ft·lbf (4.4 ± 0.4 N·m).
Set Screw
Condenser fan
Set Screw
66