Removal Of Condensate Pump - Denso Movincool CLIMATE PRO K60 Service Manual

Removal of Condensate Pump

1. Open the drain tank cover and remove the inlet hose and outlet hose.
Inlet Hose
2. Loosen the two (2) screws at bottom edge and remove the other four (4) M4 x L10 screws.
Pull the service panel for pump upward and remove it from the side panel.
3. Remove the five (5) M6 x L12 screws from the condenser side panel.
Condenser Side Panel
Screws (4)
M4 x L10
Loosen screw (2)
Screw (5)
M6 x L12
Service Panel for Pump
38
Outlet Hose