Denso Movincool CLIMATE PRO K60 Service Manual page 71

Removal of Blower Assembly
17. Remove the four (4) M4 x L10 screws and remove the ring from the fan casing with condenser
fan motor.
Ring
Screw (4)
M4 x L10
18. Loosen the set screw of the condenser fan with a hex key, and then remove the condenser fan.
Set Screw
Note:
When reinstalling the condenser fan, fasten the set screw at the torque of 10 ± 1 ft·lbf (14 ± 1.4 N·m).
A A
19. Remove the four (4) nuts and remove the condenser fan motor
Nut (4)
71