Removal Of Panels - Denso MOVINCOOL Climate pro k18 Service Manual

Removal of Panels

1. Open the drain tank cover and remove the tank.
2. Remove the evaporator and condenser filter
panels.
3. Loosen the bottom two (2) screws and remove
the other seven (7) M4 x L10 screws. Move the
service panel upward and remove it from the logo
side panel.
4. Loosen the center bottom screw (1) and remove
the other seven (7) M4 x L10 screws. Move the
upper rear panel upward and remove it.
22
Screw (7)
M4 x L10
Loosen screw (2)
Screw (7)
M4 x L10
Loosen screw (1)