Configuring Watch Settings; Changing The Home City Summer Time Setting; Connection; Connecting With A Phone - Casio 5618 Operation Manual

2. X
Hold down (D) for at least five seconds.
The phone will sound a tone when it
establishes a connection with the watch.
It will take a few seconds before the
●
phone tone sounds.
Searching for phone
3. X
Press any button to stop the tone.
You can press any watch button to stop
●
the phone tone only during the first 30
seconds after it starts to sound.
Note
Connection with your phone is not
●
possible while the watch's Airplane
Mode is enabled. To connect with your
phone, disable the Airplane Mode.
Using the Watch in a Medical
l
Facility or Aircraft

Configuring Watch Settings

You can use EDIFICE Connected to specify
the interval for acquiring the latest
appointments from your phone, to enable or
disable the watch operation tone, and to
configure other settings.
Make sure that the symbol is shown on the
e
●
watch display when you perform the
procedure below.
If is not displayed, refer to the information
e
●
at the link below.

Connecting with a Phone

l
1. Y
Tap the "EDIFICE Connected" icon.
2. Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Operation Guide 5618
Changing the Home City
Summer Time Setting
Make sure that the
●
watch display when you perform the
procedure below.
If is not displayed, refer to the information
e
●
Connected
at the link below.
Connecting with a Phone
l
1. Y
Tap the "EDIFICE Connected" icon.
2. Y
Perform the operation shown on the
phone screen to change your Home City
summer time setting.

Connection

Connecting with a Phone
Your watch can connect with a phone that is
paired with it.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
l C
Connecting with a Phone
●
If does not appear on the watch display even
e
though it is paired with your phone, hold down
(D) for at least two seconds to connect with
your phone.
Once the watch and phone are connected,
●
the connection is maintained.
Important!
If you have problems establishing a
●
connection, it could mean that
EDIFICE Connected is not running on
your phone. On your phone's home
screen, tap the "EDIFICE Connected"
icon. After the app starts up, hold down
the watch's (D) button for at least two
seconds.

Unpairing

Unpairing the watch from a phone requires
both EDIFICE Connected and watch
operations.
Note
If you are using an iPhone, also delete
●
the pairing information stored on the
phone.
symbol is shown on the
e
Pair the watch with a phone.
Deleting Pairing Information from
●
EDIFICE Connected
1. Y
Tap the "EDIFICE Connected" icon.
2. Y
Perform the operation shown on the
phone screen to unpair.
Deleting Pairing Information from the
●
Watch
1. X
Hold down (C) for at least two seconds
to enter the Timekeeping Mode.
2. X
Hold down (B) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Home City
3. X
Press (C) 3 times.
This causes the seconds to flash.
Seconds
4. X
Hold down (A) for at least two seconds.
Release it when [CLR] stops flashing.
This deletes the pairing information from
the watch.
5. X
Press (B) to return to the Timekeeping
Mode.
iPhone Only
●
Deleting the phone's pairing
information
For details about setting procedures, see your
phone documentation.
"Settings" "Bluetooth" Cancel the watch's
n n
device registration.

If you purchase another phone

You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
Deleting Pairing Information from the
l
Watch
Pair the watch with a phone.
l C
9