Table of Contents
Advertisement
Congratulations on the purchase of a Techcon Systems Automated Dispensing Robot. If you have not done
so, see the installation guide provided with your system for installation instructions.
Now that your dispensing system is ready to use, take a few moments to get to know the parts of your
dispensing system and software. This manual is designed to help you use the robot as quickly as possible.
We, here at Techcon Systems, hope you find this product beneficial. If you have any questions, please
contact us at the details listed below:
For Sales and Support:
Techcon Systems Corporate Headquarters,
10800 Valley View Street, Cypress, California, 90630, USA.
Tel: 1-714-230-2398, Fax: 1-714-828-2001
E-mail:
oemorders@okinternational.com
Techcon Systems European Corporate Office,
Eagle Close, Chandler's Ford Industrial Estate,
Eastleigh, Hampshire, SO53 4NF, UK.
Tel: +44 2380 489 100, Fax: +44 2380 489 109
E-mail:
europe-orders@okinternational.com
Or visit
www.techcon.com
This manual is designed to provide information about Techcon Systems robot hardware. Every effort has
been made to make this manual as complete and accurate as possible. There is no implied or expressed
warranty as to the purpose, suitability or fitness of the information. The information is provided on as as-
is basis. Techcon Systems reserves the right to improve and revise its products. This manual specifies and
describes the product as it existed at the time of publication. As with any new programming software, a
basic understanding of the vocabulary is necessary.
2
Advertisement
Table of Contents
Need help?
Do you have a question about the TSR2000 Series and is the answer not in the manual?
Questions and answers