Control Panel Page Network Items - Casio XJ-UT311WN Network Function Manual

Control Panel Page Network Items

To do this:
Change the projector name
Specify whether or not to require log in code input
when establishing a wireless LAN connection
Specify whether to show or hide the user name of the
computer currently projecting on the projector via a
wired LAN
Specify whether projector power can be turned on
via LAN while the projector is in standby
Enable or disable PJLink connection authentication
Enable or disable wireless LAN standard
IEEE802.11n
Specify whether wireless LAN channel width should
be set automatically or should be fixed (20 MHz)
*1 Projector standby power consumption depends on whether or not "Remote On" is enabled. For
information about power consumption in each standby state, see the "User's Guide".
Perform this operation:
In the "Projector name" box, input up to 16 single-byte
characters (no symbols) for the projector name.
In the "Login Code" area, click "ON" (prompt for login code
input) or "OFF" (do not prompt for login code input).
In the "Show User Name" area, click either "ON" (show) or
"OFF" (hide).
1
In the "Remote On* " area, click "Enable" (enable power
on) or "Disable".
In the "PJLink Authentication" area, click "Enable" or
"Disable".
In the "IEEE 802.11n (Wi-Fi)" area, click either "Enable" or
"Disable".
In the "Channel Width" area, click "20MHz" or "Auto".
24