Control Panel Lock (Xj-F Series Only); To Lock The Control Panel; To Unlock The Control Panel - Casio XJ-V100W User Manual

Control Panel Lock (XJ-F Series Only)

Control panel lock disables (locks) all of the projectors keys, except for the [
projector operation to the remote controller, which protects against inadvertent mis-operation.

To lock the control panel

1.
Press the [MENU] key to display the setup menu.
2.
Use the [] key to select "Option Settings 2", and then press the [ENTER] key.
3.
Use the [] key to select "Control Panel Lock".
4.
Use the [] key to select "On".
5.
When the confirmation dialog box appears, press the [ENTER] key.
 This disables (locks) all projector keys except for the [
6.
After you are finished, press the [MENU] key to exit the setup menu.
Note
 Even if the control panel is locked, you can clear a warning message (page 69) that appears on
the projection screen by pressing the projector's [ESC] key.

To unlock the control panel

Perform either of the following operations.
 On the projector, hold down the [] key until the message "Control panel was unlocked." appears.
 To use the remote controller to unlock the control panel, perform the procedure under "To lock the
control panel" above. In step 4, press the [] key of the remote controller to select "Off" and then
press the [MENU] key.
] key.
35
] key. This limits