Casio XJ-UT311WN Network Function Manual page 21

(B) To specify your computer's IP address manually for a wired LAN
connection (when your computer's IP address is fixed)
1. Perform steps 1 through 6 of (A), above.
Computer Operation
2. Specify an IP address for the computer. Octets 1, 2, and 3 should be the same as those for
the projector's IP address. For Octet 4, specify a value in the range of 1 to 254, which is
different from that of the projector's IP address.
 For example, if the projector's IP address is 192.168.100.10 (which is its initial default), you
should specify a computer IP address of 192.168.100.XXX, where XXX is a value from 1 to
9, or 11 to 254.
(C)To establish a wired LAN connection between the projector and a
computer via a router *
1. Use a LAN cable (use of a shielded LAN cable (STP) is recommended) to connect the projector
to the router to which the computer is connected via the LAN.
Projector Operation
2. Perform the following steps to display the IP Settings dialog box: [MENU] key
Settings"
3. Press the [] key to select "Auto" for "IP Settings".
4. Perform steps 4 through 6 of (A), above.
*1 This procedure assumes that a DHCP server is running on the network to which the router
belongs, and that there is a LAN connection between the computer and router.
Projector Operation
2.
Press the projector's [INPUT] key as many times as necessary to select
"Network", and then press the [ENTER] key.
 This will project the LAN connection standby screen.
3.
Check the IP address ("Server IP") in the lower left corner of the LAN connection
standby screen.
Computer Operation
4.
Start up the computer's web browser, input "http://<IP address you looked up in
step 3 above>" into the address bar, and then press [Enter].
 This will display the "CASIO Projector" top page.
5.
On the left pane, click "Projector Admin". On the password input screen that
appears, input the password. (The initial default password is "admin".)
6.
Click [Login].
 If log in proceeds normally, the "System Status" page will appear.
1
"Projector Wired LAN Settings".
21
"Network