Casio XJ-UT311WN Network Function Manual page 8

Computer Operation
7.
Start up Network Connection.
 If the "Set Network Location" dialog box appears, click [Cancel] to close the dialog box.
 The Network Connection window will appear with the message "Connecting".
 If the projector could not be found, a [Reconnect] button will appear on the Network
Connection window. If this happens, check the points listed below and then click the
[Reconnect] button.
– Check if the wireless adapter is correctly connected to the projector. See "Connecting the
Wireless Adapter to the Projector" (page 6).
– Check if the projector is turned on and projecting the LAN connection standby screen.
 If multiple connectable projectors are found, a "Projector List" dialog box will appear. If this
happens, click the SSID of the projector you want to connect with, and then click [OK].
8.
What you need to do next depends on the type of SSID you selected in step 3 of
this procedure, as described below.
For this type of SSID:
Simple Connection SSID
Generic SSID
User SSID
*1 In the "User Name" box, you can enter any name up to 12 characters long. The user name you
enter here will be displayed as the user name on the projection screen.
*2 In the "Login Code" box, enter the four-digit number shown in the upper left corner of the LAN
connection standby screen that is being projected. The login code is updated to a new value
each time the projector is started up. Each time you perform the above procedure to connect,
check the login code on the projection screen and input the correct login code for the current
startup.
Perform this operation:
On the "Enter the login code." dialog box that appears, enter the user name*
2
login code* , and then click [OK].
1. On the "Enter the passphrase or WEP key." dialog box that appears, enter the
user name* 1 and passphrase, and then click [OK].
 In accordance with the SSID of the projector being connected to, input the
characters shown below into both the "Passphrase/WEP Key Input" and
"Confirm" boxes.
SSID of Projector Being
Connected
casiolpj0101
casiolpj0102
casiolpj0103
casiolpj0104
2. On the "Enter the login code." dialog box that appears, enter the login code*
and then click [OK].
1. On the "Enter the passphrase or WEP key." dialog box that appears, enter the
user name* 1 and passphrase, and then click [OK].
 In both the "Passphrase/WEP Key Input" and "Confirm" boxes, enter the
text string that you specified as the passphrase when creating the user
SSID.
2. On the "Enter the login code." dialog box that appears, enter the login code*
and then click [OK].
8
Input Character String
(Passphrase)
casiolpj01
casiolpj02
casiolpj03
casiolpj04
1 and
2
2