Establishing a Wired LAN Connection between the Projector
and a Computer via a Router
The procedure below assumes that a DHCP server is running on the network to which the router
belongs, and that there is a LAN connection between the computer and router.
Projector Operation
1.
Use a LAN cable (use of a shielded LAN cable (STP) is recommended) to connect
the projector to the router to which the computer is connected via the LAN.
2.
On the projector, select "Auto" for "IP Settings".
1. Perform the following steps to display the IP Settings dialog box: [MENU] key
"Network Settings"
2. Press the [ ] key to select "Auto" for "IP Settings".
3. Press the [ESC] key to return to "Network Settings".
4. Select "Update Network Settings" and then press the [ENTER] key.
5. In response to the network setting update dialog box that appears, press the [] key to select
"Yes" and then press the [ENTER] key.
Computer Operation
3.
Perform the operation from step 3 under "Establishing a Connection between the
Projector and Computer and Projecting via a Wireless LAN Access Point" (page
14).
"Projector Wired LAN Settings".
17