Projector Admin Pages Operations - Casio XJ-UT311WN Network Function Manual

Projector Admin Pages Operations

Perform the operations below after logging in to the Projector Admin Pages. For information about the
operation up to login, see "Logging In to the Projector Admin Pages" (page 20).
To do this:
Display the system
status
Configure Control Panel
page network settings
Configure Network
Settings page settings
Change the password
for logging in to the
Projector Admin pages
Perform this operation:
On the left pane, click "System Status". This displays the information below.
Firmware Version: This is the version of the projector's firmware (built-in software).
IP Address: IP address currently assigned to the projector.
Subnet Mask: Subnet mask value currently configured on the projector.
Default Gateway: Default gateway currently configured for the projector.
MAC Address: Fixed wired LAN MAC address assigned to each projector.
Wireless MAC Address: Fixed wireless LAN MAC address assigned to each wireless
adapter.
Projection Status:
Projection Standby: Standing by for projection over a LAN connection.
Projecting: Projecting over a LAN connection.
Number of Users: Number of users currently projecting from computers via a LAN
connection.
Login Code: Projector's current login code.
1. On the left pane, click "Control Panel" to display the "Control Panel" page.
 "Control Panel" page setting items are divided between the two groups shown
below. You can configure the settings of one group's items at a time.
Group 1 : Projector name, Login Code
Group 2 : Show User Name, Remote On, PJLink Authentication,
IEEE 802.11n (Wi-Fi), Channel Width
2. On the "Control Panel" page, configure the settings of either Group 1 or Group 2.
 For information about how to configure settings, see "Control Panel Page Network
Items" (page 24).
3. To apply Group 1 settings, click [Apply] below "Login Code". To apply Group 2
settings, click [Apply] below "Channel Width". This displays a dialog box asking if you
want to restart the projector.
4. To restart the projector and reflect the changed settings, click [OK].
 Clicking [OK] will reflect the changed settings and restart the projector. The LAN
connection between the projector and computer will be terminated at this time.
1. On the left pane, click "Network Settings".
2. On the "Network Settings" page that appears, configure the settings you want.
 For information about the setting you can configure and the operation required to
do so, see "Network Settings Page Items" (page 25).
3. To reflect "Network Settings" page changes on the projector, click [Apply]. This
displays a dialog box asking if you want to restart the projector.
4. To restart the projector and reflect the changed settings, click [OK].
 Clicking [OK] will reflect the changed settings and restart the projector. The LAN
connection between the projector and computer will be terminated at this time.
1. On the left pane, click "Change Passwords".
2. Under "Projector Admin", input up to eight single-byte characters for the new
password into both "New Password" and "Reinput Password". Input the same
password into both boxes.
3. Click [Apply].
22