Safety Considerations; Installation Best Practices - Eaton Cutler-Hammer PanelMate ePro PS Series User Manual

Safety Considerations

This equipment is suitable for Class I, Division 2, Groups A,B,C,D or non-hazardous locations
only.
EXPLOSION HAZARD. SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR
RISQUE D'EXPLOSION. LA SUBSTITUTION DE COMPOSANTS PUET RENDRE CE
MATERIAL INACCEPTABLE POUR LES EMPLACEMENTS DE CLASSE I, DIVISION 2.
EXPLOSION HAZARD. DO NOT REPLACE COMPONENTS UNLESS POWER HAS BEEN
SWITCHED OFF OR AREA IS KNOWN TO BE NON-HAZARDOUS.
RISQUE D'EXPLOSION. COUPER LE COURANT OU S'ASSURER QUE L'EMPLACEMENT
ES DESIGNE NON DANGEREUX AVANT DE REPLACER LE COMPOSANTS.

Installation Best Practices

1. Never use foreign objects to activate the touchscreen. Use a hand, gloved hand or
stylus. Foreign objects (such as a screwdriver) may cause damage to the
touchscreen or scratch the front panel reducing the transmissivity.
2. Use a light touch to activate the touchscreen. Touchscreen activation does not
require the same force necessary to activate a mechanical switch.
3. Disconnect this equipment from the power outlet before cleaning. Use a damp cloth.
Do not use liquid or spray detergents for cleaning.
4. Do not remove or insert the CompactFlash memory card while the PanelMate ePro
PS unit is powered up. Doing so may cause damage to the CompactFlash memory
and/or processor board.
5. Keep this equipment away from condensing humidity.
C h a p t e r 4 : H a r d w a r e I n s t a l l a t i o n
CAUTION
CLASS I, DIVISION 2.
ADVERTISSMENT
WARNING
ADVERTISSMENT
4 1