Deprag AST6 Operating Instruction Booklet page 46

Adding steps to the program:
Option 1:
Select a screwdriver pattern or a command by clicking on it. Keep the mouse button
pressed and drag the screwdriver pattern or the command to the desired position in the
screwdriver program. Insert the screwdriver pattern or the command by releasing the
mouse button.
Option 2:
Select an available program step by clicking this step. Subsequently click the screwing
sample or the command that you like to insert. If you click "insert in front", if the screw
program or command should be inserted in front of the currently selected program step or
click "insert behind", if the screwing sample or the command should be inserted behind the
currently selected program step.
IMPORTANT
If the screwing program is still empty, then the screwing sample or
command are always inserted as first parameter step.
View/process a program step:
Select an available program step by clicking this step. The parameter of this step are
displayed. A new value can be directly entered in the input field next to the parameter.
Save program:
Click the "accept" button, which can be found below the last program step in order to save
the program step and the parameter.
Copy program:
If you want to save an available program under another program number, select the new
program number from the list field next to the "accept as" button. The "accept as" button
can be found below the last program step. Subsequently click on "accept as" in order to
save the program under a new number.
Existing programs can be saved on the
• "general" registry card and
• saved programs can be repaired and
• all programs can be deleted.
After clicking the "Back up copy" button, a window is opened in which you can set the
name and location of the back up file.
In order repair saved programs, enter the file name and path in the input field and click
"load back up copy". Alternatively you can select the file by clicking the "Search.." button
next to the input field.
Printing a program:
If you would like to print out a program, click on the "Print Preview" button. To return to the
normal view, press the "Normal View" button.
Deleting a program step or a program:
If you would like to delete individual program steps, click on the "Remove" button of the
step that needs to be deleted. If you would like to delete the entire screwdriver program,
46