Default Values; General Parameters; Special Parameters For Fieldbus Systems (Optional); Table 12: Default Values - Deprag AST6 Operating Instruction Booklet

9.2

Default Values

The default values can be adjusted as follows:
• at the control in the system menu  tab the setting on the general page to "set
default values"
• click the "reset" button in the web interface in the setting menu  default settings

9.2.1 General Parameters

Parameter
Language
Unit for torque
Main direction of rotation
Password
Baud rate
Rotation speed decrease
Signal sound
Offset gear
Fieldbus
Statistic: Limits for CP/CPK value
Table 12: Default Values

9.2.2 Special parameters for fieldbus systems (optional)

9.2.2.1 Profibus
Parameter
Profibus address
Table 13: Default values for Profibus
9.2.2.2 Profinet
Parameter
IP address
Net mask
Gateway
Station name
Table 14: Default values for Profinet
9.2.2.3 Ethernet IP
Parameter
IP address
Net mask
Gateway
DHCP
BOOTP
Table 15: Default values for Ethernet IP
9.2.2.4 Ethercat
No settings are necessary.
Gear transmission ratio
Efficiency
Direction change
Available
Control via I/O interface
52
Value
english
N•cm
right
0000
auto
active
never
1
100%
no
no
inactive
+/- 15%
Value
64
Value
10.10.24.10
255.255.00
10.10.20.9
nic 50 repns
Value
10.10.24.11
255.255.0.0
10.10.20.9
inactive
inactive