Deprag AST6 Operating Instruction Booklet page 42

Different extensions are available, at extra cost, for the sequence controller AST6 (also
refer to Optional Equipment).
To activate these extensions please contact the DEPRAG sales department or your
DEPRAG dealer.
In order to be able to perform the activation, some information is required which must be
contained in your order:
◦ Activation key of the respective option
◦ Serial number of the controller
The activation key can be found to the right, next to the respective option. The key can
either be directly copied and inserted in an email or saved by clicking the file.
You will receive a license file for the activation, which contains the respective activation
key. The activation key can be entered directly on the bottom of the page or by clicking the
button "load key".
As an alternative, the license data can be also directly loaded. To do this, click on the
button "search....." and select the respective file. Click "load license data".
One the activation key is loaded, the extension is displayed as released and can now be
used.
8.3.4.4 Settings
The Settings menu is used to change the default (or base) settings of the AST6, set the
date and time and also to change the password for the AST6 sequence controller.
Making changes is possible only if the password has been entered at the time of login,
otherwise the information is merely displayed.
8.3.4.4.1 Default Settings
Here it is possible to perform most settings for the sequence controller AST6.
42