Data Overwrite; Screen Saver; Ip Address, Subnet Mask, Default Gateway; Touch Panel Beep - M-system 73VR21 Series User Manual

2.2.5 DATA OVERWRITE

Data can be overwritten when the data file is full.
ON
OFF

2.2.6 SCREEN SAVER

The LCD display's backlight can be turned off when the screen is untouched for a specific time period.
Enter a desired time in minutes to initiate the screen saver.
Screen saver time setting

2.2.7 IP ADDRESS, SUBNET MASK, DEFAULT GATEWAY

In order to connect the 73VR21x to a PC via Ethernet when using the 73VR21BLD (Builder), set an appropriate IP
address.
Enter the IP address assigned to the 73VR21x.
IP address
The subnet mask and the default gateway are given only for indication. They are not modifiable.

2.2.8 TOUCH PANEL BEEP

You can specify if you want a beep sound or not whenever you touch the screen of the 73VR21x.
OFF
ON
The oldest data is replaced with a new data when the file
capacity is full.
The 73VR21x stops recording when the file capacity is full.
Selectable range: 0 to 99 (minutes)
The screensaver function is deactivated with the time set to
zero (0).
Factory default setting: 192.168.0.1
Beep sound is off.
Beep sound is on.
73VR21BLD USERS MANUAL EM-7395-C Rev.7 8