PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
M6 Locknut (87)
M12 Nut (84)
M8 Nylon Locknut (58)
Large Washer (85)
M10 Washer (57)
M8 x 22mm Shoulder Bolt (65)
M4 x 20mm Self-tapping Screw (69)
M5 x 20mm Self-tapping Screw (64)
M6 x 16mm Screw (62)
M10 Nylon Locknut (56)
M10 Large Washer (80)
M8 Washer (59)
M6 Washer (82)
M5 Washer (72)
M4 Washer (33)
M10 x 45mm Button Bolt (77)
M10 x 46mm Bolt (81)
M10 x 51mm Bolt (66)
M6 x 63mm Screw (70)
M10 x 63mm Bolt (75)
M8 x 65mm Bolt (68)
M10 x 67mm Bolt (71)
M8 x 63mm Carriage Bolt (78)
M10 x 70mm Bolt (86)
M10 x 77mm Bolt (79)
M10 x 85mm Bolt (67)
M10 x 155mm Bolt (74)