Atmel SMART SAM4C Series User Manual page 5

2. Power Up
2.1 Power Up the Board
Unpack the board taking care to avoid electrostatic discharge. Unpack the power supply, select the power plug
adapter corresponding to that of your country, and insert it in the power supply.
Connect the power supply DC connector to the board and plug the power supply to an AC power plug. The board
LCD should light up and display a graphic demo program.
2.2 Sample Code and Technical Support
After boot up, designers can run sample code or their own application on the development kit. Users can download
sample code and get technical support from the Atmel website. The SAM4C32-EK is supported by the Atmel
Software Framework (ASF) which is also available on the Atmel website.
5 SAM4C32-EK [USER GUIDE]
Atmel-11253A-ATARM-SAM4C32-EK-UserGuide_17-Sep-14