Filter Installation - Sharp FP-J40A Operation Manual

FILTER INSTALLATION

To maintain the quality of the fi lter, it is installed in the main unit and packed in plastic bag.
Be sure to remove the plastic bag from the fi lter before using the main unit.
1
Remove the Pre-Filter ( Back Panel ).
Pull
2
Remove the plastic bag from the
Filter.
OM_FP-J40A.indd 5
Be sure to remove the power plug
from the wall outlet.
3
Place the Filter inside the main unit.
Do not install the fi lter backwards or the main unit
will not operate properly.
Active Carbon
Deodorizing Filter
4
Replace the Pre-Filter ( Back Panel ) to
the main unit.
Click
• Do not operate the main unit without the fi lter.
EN-5
HEPA
Filter
Tag
2018/09/28 12:01:12