Table of Contents
Advertisement
PREPARATION
FILTER INSTALLATION
1
Remove the Back Panel.
2
Remove the plastic bag
from the each filter.
HEPA Filter
OPERATION
START/STOP
START
HAZE MODE
Operates at HIGH fan speed for 60 minutes and then
alternates between Low and High level for 20 minutes each.
NOTE
• The Plasmacluster Ion can not be turned "OFF". (Ref.E-9)
Back Panel
Deodorizing Filter
STOP
10 minutes: Max High fan level
50 minutes: High fan level
20 minutes: Low fan level
20 minutes: High fan level
Always be sure to remove the
power plug from the wall outlet.
3
Install the filters in the correct order as
shown.
4
Install the Back Panel.
3
NOTE
• When replacing the filter, making a memo of the start of
use date is recommended.
INTELLIGENT MODE
The fan speed is automatically controlled depending on the 7
detection. (Ref.E-1)
AUTO MODE
The fan speed is automatically controlled depending on the
5 detection. (PM2.5 / Usual dust / Temperature /Humidity /
Light)
NOTE
• Front Display, Cleanliness Monitor and Air Outlet LED
automatically switch ON and OFF based on room
brightness. (When light control is set to "Auto". Ref.E-10)
E-7
HEPA Filter
Tag
Deodorizing Filter
Click
2
3
(KC-G60 / KC-G50)
(KC-G40)
1
Advertisement
Table of Contents
