Filter Installation - Sharp FP-F30E Operation Manual

FILTER INSTALLATION

To maintain the quality of the filter, it is installed in the main unit and packed in plastic
bag. Be sure to remove the filter from the plastic bag before using the unit.
1
Remove the Back Panel.
Upper Tabs
2
Remove the plastic bag from
the Filter.
3
Place the Filter within the main
unit.
Do not install the filter backwards or the
unit will not operate properly.
OM_FP-F30E_EN_MA_CS.indb 5
Pull
E-5
Be sure to remove the power plug
from the wall outlet.
4
Replace the Back Panel to the
main unit.
Push
5
Fill in the usage start date on the
Date Label.
Use the date as a guide for the filter re-
placement schedule.
• Do not operate the unit without the filter.
Bottom Tabs
Date Label
2/9/2558 BE 4:24 PM