Advertisement

Quick Links

FP-J52M
FP-J50M
"Plasmacluster" and "Device of a cluster of grapes"
are trademarks of Sharp Corporation.
* The number in this technology mark indicates an
approximate number of ions supplied into air of 1 cm
which is measured around the center of a room applicable
floor area (at 1.2 m height above the floor) when the
product is placed close to a wall at the MED mode setting.
3
,
AIR PURIFIER
OPERATION MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Sharp FP-J52M

  • Page 1 OPERATION MANUAL FP-J50M “Plasmacluster” and “Device of a cluster of grapes” are trademarks of Sharp Corporation. * The number in this technology mark indicates an approximate number of ions supplied into air of 1 cm which is measured around the center of a room applicable floor area (at 1.2 m height above the floor) when the...
  • Page 2: Table Of Contents

    Thank you for purchasing this SHARP Air Purifier. Please read this manual carefully before using the product. This manual should be kept in a safe place for handy reference. CONTENTS FEATURES IMPORTANT SAFETY INSTRUCTIONS ..2 Unique Combination of Air Treatment...
  • Page 3 Deodorizing Filter Pre-Filter At Sharp we understand that our responsibility does not end at selling you our products. Sharp has been working in the area of safe disposal of electronic waste. Under our Company policy as well the legislation passed by the Ministry of Environment and Forests (MoEF), called E-waste (Management) Rules, 2022, which comes into effect from 1st Oct 2016, •...
  • Page 4: Important Safety Instructions

    5. If the power cord or plug is damaged, it must be NOTE replaced by the manufacturer, its service agent, a Sharp authorized Service Center or similarly - Radio or TV Interference - qualified persons in order to avoid a hazard.
  • Page 5 restrict the air inlets and/or outlets. 4. Always lift up the product when moving it on easily damaged flooring, an uneven surface, or 4. Avoid locations exposed to direct sunlight. It may carpet. cause the product to change shape or color. 5.
  • Page 6: Part Names

    Cleanliness Monitor Blue Clean Indicates the air purity of the room in 5 levels with color changes. Yellow Impure BACK Only FP-J52M Clean Ion Shower Button, Indicator Light (white) Light Control Button (Press 3 sec.) Only FP-J50M HAZE Button, Indicator Light Light Control Button (Press 3 sec.)
  • Page 7: Filter Installation

    FILTER INSTALLATION Always be sure to remove the power plug from the wall outlet. To maintain the quality of the filter, it is installed in the main unit and packed in plastic bag. Be sure to remove the plastic bag from the filter before using the product. Remove the Back Panel Place the Filter within the main unit.
  • Page 8: Operation

    AUTO SLEEP starts in the previous mode it was operated in. NOTE CLEAN ION SHOWER Only FP-J52M AUTO The product releases Plasmacluster ions with strong The fan speed is automatically controlled depending on airflow and collects dusts while decreasing static the 3 detection.
  • Page 9 LIGHT CONTROL You can set the Cleanliness Monitor / Plasmacluster Ion Light to OFF when they are lighting up. (with the product ON) NOTE Only FP-J50M • If the HAZE Button is not pushed within 8 seconds, Press HAZE Button the setting will be saved automatically.
  • Page 10: Care And Maintenance

    CARE AND MAINTENANCE Always be sure to remove the power plug from the wall outlet. To maintain optimum performance of this air purifier, please clean the product including the filter periodically. Be sure to disconnect the power cord from the wall outlet before performing any maintenance. BACK PANEL (Pre-filter) Gently remove dust from the back panel, using a vacuum cleaner...
  • Page 11: Replacement

    MAIN UNIT Wipe with a dry, soft cloth For stubborn stains or dirt, use a soft cloth dampened with warm water. CAUTION • Do not use volatile fluids Benzine, paint thinner, polishing powder, etc., may damage the surface. • Do not use detergents Detergent ingredients may damage the main unit.
  • Page 12: Troubleshooting

    TROUBLESHOOTING Before calling for service, please review the Troubleshooting list below, since the problem may not be a product malfunction. SYMPTOM REMEDY (not a malfunction) Odors and smoke are not removed. • Replace the filters if they appear to be heavily soiled. (Page 8) The Cleanliness Monitor illuminates •...
  • Page 13: Wi-Fi Settings

    Wi-Fi SETTINGS By connecting your air purifier with your smart device, you can enjoy greater convenience. SAFETY PRECAUTIONS 2. Wi-Fi connection and performance cannot be WARNING guaranteed for all routers or environmental conditions. When remotely controlling the air purifier 3. At the following places, Wi-Fi connection might In case of remote operation from outside, you be unstable: may not be able to check the air purifier's current...
  • Page 14 App. Follow instructions on the App. Confirm “Terms of Service”. Input the SHARP ID. • In case of not having a SHARP ID, please register a new SHARP ID. iii. Input a name for your smart device.
  • Page 15 How to initialize Wi-Fi function How to set Wi-Fi ON / OFF after completing the initial settings Press the Wi-Fi button for more than 8 seconds. How to turn off Wi-Fi. Blink Goes off more than 8 sec. more than 3 sec.
  • Page 16: Troubleshooting Of The Wi-Fi Function

    TROUBLESHOOTING OF THE Wi-Fi FUNCTION Please check the following details, before enquiring or requesting for repairs. Problem Items to check Wi-Fi connection of the • Check the specifications of the router in use. air purifier and the router • Adjust the router and antenna direction, move the router and antenna closer, and so cannot be performed.
  • Page 17: Intellectual Property Rights For This Product

    INTELLECTUAL PROPERTY RIGHTS FOR THIS PRODUCT ■ Software structure WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 3. Neither the name(s) of the above-listed copyright holder(s) nor Software installed in this product is structured with SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR the names of its contributors may be used to endorse or promote multiple independent software components, each...
  • Page 18 the name of Lucent or any of its entities not be used in advertising SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR Copyright (C) 1997 by Andrey A. Chernov, Moscow, Russia. or publicity pertaining to distribution of the software without specific, PROFITS;...
  • Page 19 OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR Copyright 1989, 1990 Advanced Micro Devices, Inc. TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING Copyright (c) 2008 Ed Schouten <ed@FreeBSD.org> IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF All rights reserved. This software is the property of Advanced Micro Devices, Inc (AMD) ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  • Page 20: Specifications

    SPECIFICATIONS Model FP-J52M / FP-J50M Power supply 220 - 240 V 50 - 60 Hz Fan speed Adjustment SLEEP* Fan Speed (m /hour) 48 ~ 120 Noise Level (dBA)* 15 ~ 30 Rated Power (W) 4.5 ~ 7.5 1.6 (When Wi-Fi adapter is ON.) Standby Power (W) 1.2 (When Wi-Fi adapter is OFF.)

This manual is also suitable for:

Fp-j50m

Table of Contents