Filter Installation - Sharp FP-J30J-B Operation Manual

FILTER INSTALLATION

To maintain the quality of the filter, it is installed in the main unit and packed in plastic bag.
Be sure to remove the filter from the plastic bag before using the main unit.
1
Remove the Back Panel.
Pull the Back Panel while holding down
the Main Unit.
2
Remove the plastic bag from
the Filter.
Pull
7
Always be sure to remove the
power plug from the wall outlet.
3
Place the Filter within the Main
Unit.
Do not install the filter backwards or the
main unit will not operate properly.
4
Replace the Back Panel to the
main unit.
• Do not operate the main unit without
the fi lter.
Push
Push
Bottom Tabs