Cleaning The Water Chamber; Cleaning The Enclosure - 3B Medical Line II QX Series User Manual

Luna II QX CPAP / Luna II QX Auto CPAP User Manual V1.1
Luna II QX CPAP / Luna II QX Auto CPAP User Manual V1.1

17.2 Cleaning the Water Chamber

(1) Opening the Water Chamber: Open the cap of the water chamber, as shown in
Fig. 17-1.
Fig. 17-1
(2) Cleaning the Water Chamber: You may also clean the water chamber with a
soft cloth which does not scratch the water chamber (dip the soft cloth in liquid
soap if necessary), rinse it thoroughly, and then wipe it dry with a soft cloth.
(3) Returning the Water Chamber according to instructions in 14.1.3.
WARNINGS!
• Emptying and cleaning the water chamber daily will help prevent mold and
bacteria growth.
• Allow the water in the chamber to cool down to room temperature before
removing it from the device.
CAUTIONS!
• Clean the water chamber only after the water in it cools. Make sure that no water
enters the device.
• After cleaning, rinse the water chamber throughly in clean water to make sure
that no soap residue is left; then wipe it dry with a lint-free cloth, so as to prevent
calcareous accumulations.
• Inspect the water chamber for any leak or damage. Replace the water chamber
if any damage is present.
• It is recommended to do daily cleaning of the water chamber.

17.3 Cleaning the Enclosure

Wipe the surface of the device with a soft, slightly damp cloth.
CAUTION!
• The device can only be used after the enclosure is dry, so that no moisture enters
the device.
• It is recommended to clean the enclosure once a week.
28 / 40
28