Luna II QX CPAP / Luna II QX Auto CPAP User Manual V1.1
Luna II QX CPAP / Luna II QX Auto CPAP User Manual V1.1
WARNING!
•
Turn the device off and allow approximately 15 minutes for the heater plate and
water to cool.
14.1.2 Filling Water
Open the cap, as shown in Fig. 14-2, and fill the water chamber with approximately
360 ml of water, as shown in Fig. 14-3. Make sure that the water does not exceed the
maximum water level line.
WARNING!
• Change water before every use and do not surpass the MAX fill line.
CAUTIONS!
• Empty the water chamber when the heated humidifier is not in use.
• Distilled water is recommended.
14.1.3 Inserting the Water Chamber
Close the cap after it is filled with water, as shown in Fig. 14-4, and return it to the
device,
as shown in Fig.
Fig. 14-2
Fig. 14-3
14-5.
18
18 / 41