3B Medical Line II QX Series User Manual page 39

Luna II QX CPAP / Luna II QX Auto CPAP User Manual V1.1
Luna II QX CPAP / Luna II QX Auto CPAP User Manual V1.1
Guidance and manufacturer's declaration - electromagnetic immunity
The device is intended for use in the electromagnetic environment specified
below. The user of the device should make sure that it is used in such an
environment.
IEC 60601 Test
Immunity Test
Level
Electrostatic
±8 kV contact
discharge (ESD)
±15 kV air
IEC 61000-4-2
Electrical fast
±2 kV for
transient / burst
power supply
lines
IEC 61000-4-4
Surge
±1 kV
line(s) to line(s)
IEC 61000-4-5
0% U
cycle
At 0°, 45°, 90°,
Voltage dips, 135°, 180°,
short 225°, 270° and
interruptions 315°
and voltage
variations on 0% U
power supply
input lines 70% U
cycle
IEC 61000-4-11 At 0°
0% U
300 cycle
Power
frequency (50 /
60 Hz)
30 A/m
magnetic field
IEC 61000-4-8
Note: U is the AC mains voltage prior to application of the test level.
T
Compliance
Level
±8 kV contact
±15 kV air
±2 kV for
power supply
lines
±1 kV
line(s) to line(s)
; 0.5 0% U ; 0.5
T T
cycle
At 0°, 45°, 90°,
135°, 180°,
225°, 270° and
315°
; 1 cycle 0% U ; 1 cycle
T T
; 25 / 30 70% U ; 25 / 30
T T
cycle
At 0°
; 250 / 0% U ; 250 /
T T
300 cycle
30 A/m
36
Electromagnetic
Environment - Guidance
Floor should be wood,
concrete or ceramic tile.
If floors are covered with
synthetic material,
relative humidity should
be at least 30%
Mains power quality
should be that of a typical
commercial or hospital
environment
Mains power quality
should be that of a typical
commercial or hospital
environment
Mains power quality
should be that of a typical
commercial or hospital
environment. If the user of
the device requires
continued operation
during power mains
interruptions, it
recommended that the
device be powered from
an uninterruptible power
supply or a battery
Power frequency
magnetic fields should be
at levels characteristic of
a typical location in a
typical commercial
hospital environment
the
is
or