Installing The Air Filter And Filter Cap; Connecting To Power - 3B Medical Line II QX Series User Manual

Luna II QX CPAP / Luna II QX Auto CPAP User Manual V1.1
Luna II QX CPAP / Luna II QX Auto CPAP User Manual V1.1
• To avoid explosion, this device must not be used in the presence of flammable
gases (e.g. anesthetics).
• Tobacco smoke may cause tar build-up within the device, leading to the malfunctioning of
the device.
• Air must flow freely around the device for it to work properly.

12.2 Installing the Air Filter and Filter Cap

(1) Attach the air filter to the filter cap, as shown in Fig. 11-1.
(2) Install the filter cap containing the air filter to the device, as shown in Fig. 11-2.
CAUTION!
• The air filter must be in place when the device is operating.
• Installing the air filter and filter cap, device must be unplugged.

12.3 Connecting to Power

(1) Insert the plug of the power adapter into the DC Inlet on the back of the device;
(2) Connect the power cord to the power adapter;
(3) Plug the other end of the power cord into the power outlet.
Air Filter
Filter Cap
Fig. 12-1
Fig. 12-2
12
12 / 41