Sounding A Buzzer To Notify The User Of The End Of Printing - Roland VersaUV LEF2-300 User Manual

Managing the Operations Appropriately and Efficiently

Sounding a Buzzer to Notify the User of the End of Printing

You can configure the settings so that the user is notified of the end of printing with a buzzer.
Procedure
1.
Press [MENU].
2.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
3.
Press [▶].
4.
Press [▼] several times to display the screen shown below.
SUB MENU
PRINT-END BEEP
5.
Press [▶] to display the screen shown below.
PRINT-END BEEP
ON
6.
Press [▲] or [▼] to select an item.
PRINT-END BEEP
"OFF"(Default settings)
"ON"
7.
Press [ENTER] to confirm your entry.
8.
Press [MENU], then [◀] to go back to the original screen.
116
4. Optimizing Operation Management
OFF
Explanation
No buzzer sounds even when printing is finished.
A buzzer sounds when printing is finished.