Cleaning The Hot Tub Interior; Pillow Care - Sundance Spas maxxus 880 Series Owner's Manual

12.3 Cleaning The Hot Tub Interior

To preserve the sheen of your hot tub's surface, it is crucial that you
avoid using abrasive cleaners or cleaners which have adverse chemi-
cal effect on the surface. If you are not certain as to the suitability of
a particular cleanser, consult your authorized Sundance Dealer.
Regardless of the cleanser used, use extreme care to assure that no soap
residue is left on the surface. This could cause severe sudsing when the
hot tub is refilled.

12.4 Pillow Care

Remove and clean the headrest pillows as needed with soapy water
using a cloth or soft-bristle brush. To maintain water resistance and lus-
ter, apply a quality vinyl conditioner once a month.
IMPORTANT: Never attempt to remove the pillows by pulling on them! The
pillows utilize a bolt-on design that prohibits removal without tools.
To remove pillows:
1. Grasp center pillow insert (A)
with finger tips and gently pry
outward from pillow base (C).
2. use a standard screwdriver to
loosen and remove mounting
bolts (B) from pillow base.
3. Assemble in reverse order after
cleaning. Do NoT overtighten
pillow mounting bolts!
Page 43