Cleaning The Hot Tub Interior; Pillow Care - Sundance Spas Cameo Owner's Manual

13.3 Cleaning The Hot Tub Interior

To preserve the sheen of your hot tub's surface, it is crucial that
you avoid using abrasive cleaners or cleaners which have adverse
chemical effect on the surface. If you are not certain as to the
suitability of a particular cleanser, consult your authorized Sundance
Spas dealer. Regardless of the cleanser used, use extreme care to assure
that no soap residue is left on the surface. This could cause severe sudsing
when the hot tub is refilled.

13.4 Pillow Care

Remove and clean the headrest pillows as needed with soapy water
using a cloth or soft-bristle brush. To maintain water resistance and
luster, apply a quality vinyl conditioner once a month. Always remove
the pillows when adding chemical shock treatment to the spa water.
The pillows can be returned to the spa when the sanitizer reading drops
below 4.0 ppm.
1
Place both hands on
pillow with thumbs as
shown.
Wash pillow(s) in a mild detergent soap and warm water solution. Never machine wash your pillows
5
or attempt to clean them with a non-approved vinyl cleaning agent!
To reinstall pillows: Simply align pillow over mounting stud receptacle, then gently push inward to
6
snap in place.
2
Press inward with
thumbs to curl pillow
lip inward so you can
grab it with fingertips.
3
Flex pillow lip inward
2-3" to get a good
grip on the ends.
880 SERIES
4
Gently pull outward on
pillow to release mounting
stud from receptacle on
spa shell.
Page 45