Safety Information; General Remarks; Identification Of Notices; Staff Qualification And Training - Biral ModulA RED Series Installation And Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 95

1. Safety information

Warning
This product may only be installed and used
by people who have adequate knowledge
and experience. People with limitations
in their physical or mental capacity or sensory
perception, may not use the product, unless
they have been sufficiently trained by a person
who is responsible for their safety.
The product must be kept out of the reach
of children. The product must not be used
by children, e.g. as a toy.

1.1 General remarks

These installation and operating instructions contain items of information of fundamental
importance which must be taken into account during assembly, operation and maintenance.
They should therefore be read without fail before installation and commissioning by the fitter
and also the responsible specialist staff / operator. They must always be available for consul-
tation at the plant's place of deployment. Not only are the general safety hints included in
this «Safety Hints» section to be observed, but also the special items of safety information
included in the other sections.

1.2 Identification of notices

Information signs mounted directly on the plant, such as, for example
– rotating direction arrow
– symbols for fluid connections
must be obeyed without fail and be kept in a fully legible state.

1.3 Staff qualification and training

The staff deployed for assembly, operating, maintenance and inspection tasks must show that
they have the appropriate qualifications for such work. The field of responsibility, competence
and supervision of the staff must be stipulated exactly by the operator.

1.4 Risks in the event of non-compliance with the safety information

Non-compliance with the safety information can result in both danger for persons and also
for the plant and the environment. Non-compliance with the safety information can lead to the
loss of claims for damages of any kind. In detail, non-compliance, for example, may result
in the following risks:
– failure of important functions in the plant
– failure of prescribed methods for servicing and maintenance
– danger to persons through electrical and mechanical causes

1.5 Safety-conscious work

The safety information contained in these installation and operating instructions, the existing
national regulations for the prevention of accidents, as well as any internal working, operating
and safety regulations stipulated by the operator must be observed.
english
97
|

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ModulA RED Series and is the answer not in the manual?

Table of Contents

Save PDF