Fault Messages And Instructions; Representation Of Faults On The Display; In The Main Menu; In The Program Sequence - Miele PLW 8615 Operating Instructions Manual

Fault messages and instructions

In the main menu

In the program
sequence
82
The fault messages on the machine display are designed to help you
find the cause of the malfunction and to resolve it. However, please
note the following:
 Repairs should only be performed by Miele Technical Service or
an authorized technician.
Unauthorized repairs can expose the user to considerable risk.

Representation of faults on the display

Machine warnings  and faults  are shown in the footer of the dis-
play. The symbol is used as a button to open the list with all mes-
sages.
While the main menu is shown in the display, messages appear in a
pop-up:
Main menu

Warning
System test not carried out

If messages are present for multiple faults and warnings, a pop-up
appears for each one
The pop-ups are closed by pressing OK; the messages remain in the
list of active messages.
It may be the case that a fault has occurred multiple times. If, for ex-
ample, the system test could not be performed for 3 days, 3 pop-
ups appear with the relevant message. The pop-up must be closed
3 times by pressing OK.
The current message is displayed on the program sequence display
in addition to the progress bar. The color of the progress bar changes
depending on the type of message:
- Yellow for warnings 
- Red for faults 

Technical faults on the machine

2750

L o g i n
 
1 1 . 0 3 . 2 0 2 0 2 0 : 3 6
US
O K