Configuring The Network - Miele PLW 8615 Operating Instructions Manual

System settings
Configuring the
network
60
The Ethernet connection is configured in the
work can be configured on the machine display or using the web in-
terface. Before the machine is connected for the first time, e.g., to a
network printer, the network must be configured on the machine dis-
play. To set the printer up in the web interface, see the programming
manual.
You will receive the information required for configuring the network
from your network administrator.
Network
Press the

The network configuration parameters are displayed. The buttons
next to the parameters open the on-screen keyboard.
Enter the required values for each parameter and press OK to con-

firm.
Use the IP Address or the Host name to address the machine in the
network.
Manual entry
Parameter
Active
DHCP
IP Address
Subnet Mask
Prefix length
Host name
Standard gateway
NTP
Automatic assignment
Parameter
Active
DHCP
IP Address
Subnet Mask
Prefix length
Host name
Standard gateway
NTP
button.
Report version IPv4
Active
Inactive
Entry field
Entry field
–
Entry field
Entry field
Entry field
Report version IPv4
–
Active
–
–
–
Entry field
–
–
Network
menu. The net-
Report version IPv6
Active
Inactive
Entry field
–
Entry field
Entry field
Entry field
Entry field
Report version IPv6
–
Active
–
–
–
Entry field
–
–