Preparing The Wash Items - Miele PLW 8615 Operating Instructions Manual

Application technology
Preparing the
wash items
30
- Broken glass can result in serious injury when loading or unloading.
Damaged glass wash items must not be reprocessed in the ma-
chine.
- Nickel and chrome-plated wash items and wash items made of alu-
minum are not generally suitable for machine reprocessing. Special
process conditions are required for these wash items.
- When cleaning items that are made entirely or partially out of plas-
tic , the maximum thermal stability of the item must be considered.
Select an appropriate program or adjust the temperature of the pro-
gram accordingly.
 Danger of explosion due to flammable gases.
Flammable solvents with a flash point below 70°F (21°C) outgas
and can generate a flammable mix of gases.
Only load the machine with wash items which have traces of sol-
vents at most.
Start the reprocessing program as soon as the machine has been
loaded with the wash items.
 Risk of damage due to solvents.
Solvents with a flash point above 70°F (21°C) can damage elas-
tomers and plastics. The machine could leak as a result of this.
Only load the machine with wash items which have traces of sol-
vents at most.
Start the reprocessing program as soon as the machine has been
loaded with the wash items.
 Risk of damage due to corrosion.
Chloride solutions, particularly hydrochloric acid, and ferrous mate-
rials that can rust or corrode cause corrosion on the stainless steel
of the machine and the load carrier.
Do not introduce any chloride solutions into the machine.
Do not introduce any ferrous materials that can rust or corrode into
the machine.
 Risk of infection.
Microbiological material, pathogens, facultative pathogens, and ge-
netically modified material can cause infections or environmental
damage.
Before washing by machine, decide whether the wash items con-
taminated in this way need to be sterilized.