Install Filament - Flashforge Creator 3 Quick Start Manual
Hide thumbs
Also See for Creator 3:
- User manual (100 pages) ,
- Quick start manual (36 pages) ,
- Quick start manual (3 pages)
Advertisement
1. Open the filament cover.
3. Notice: For filament convenient rotation, please install filament follow the direction shown
in the picture.
When installing filament on the left side, please unload filament anticlockwise;
when installing filament on the right side, please unload filament clockwise.
Install Filament
2. Insert the filament into filament intake.
09
Filament
intake
Advertisement
