Flashforge Creator 3 Quick Start Manual page 14

Please operate under the guidance of customer service for the first calibration.
Build
Preheat
Door Opened Remind
Startup Sound
Left Filament Check
Right Filament Check
Calibration
Tap [Tools], tap [Setting], tap [calibration] in setting page.
1. Tap [Z-axis calibration] and wait for Z-axis calibration of extruder and build plate.
Do not interrupt during the calibration process.
Calibration
Tools
Z Calibration
Please level before Z-axis calibration.
Please refer to the 06 page for leveling
Please wait...
Auto calibration.
Wait
12
Filament Level
Setting Status
Z Calibration
X Calibration
Y Calibration
<
HOME
Home Manual
<
About