Features Overview - Viking PA-250-IP Product Manual

IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from the AC outlet. It is recommended that a surge
protector be installed to protect against such surges.
VIKING
ALC: Automatic Level Control adjustment for MIC and PAGE inputs
PAGE: Paging Input volume control and LED showing activity and audio level
AUX: Auxiliary Input volume control and LED showing activity and audio level
RING: Volume control and LED indicator for Chime and Loud Ringing tones
MUSIC: Volume control for Background Music Input
BASS: Low frequency tone control
TREBLE: High frequency tone control
MASTER VOLUME: Master volume control and LED level indicator for setting Peak Limiting
POWER: LED indicating power is on (winks off to indicate an overload condition)
VIKING
MODEL PA-250-IP
250 Watt SIP/ Multicast Paging Amplifier
AUX INPUT:
Auxiliary analog input
SHIELD:
Analog ground
600 OHM OUTPUT:
Output for driving additional amplifiers
BACKGROUND MUSIC INPUT:
3.5mm jack for connecting music source
CHIME TRIG: To trigger
one of three different chime tones
SPEAKERS: Connect up to two hundred fifty
(250) 70V or 25V speakers and/or paging horns

Features Overview

PA-250-IP Front View
MODEL PA-250-IP
250 Watt SIP/ Multicast Paging Amplifier Multicast Paging Amplifier
PA-250-IP Back View
70V
1 2 3 4 5 6 7 8 9 10 11
+ + +
SPEAKERS SPEAKERS
ALC PAGE AUX
MAC: 18E80FXXXXXX
RESET
LAN
Yellow Network Status LED: Lights steady
to indicate power and data link. Blinks to indicate
network activity.
LAN Port 10/100: Connect to your LAN via
RJ45 plug and CAT5 or greater twisted pair wire.
Green Unit Status LED
Reset Button
MAC Address Label: The MAC address is a
unique 12 digit number used by network equipment
to send data packets to the correct IP address.
4
MASTER
CHIME MUSIC BASS TREBLE VOLUME
AC POWER INPUT
(BOTH REQUIRED)
AC POWER INPUT:
Connect to 100V to 240V AC power
using the included "Y" power cord
POWER