Designed, Manufactured and Supported in the USA
VIKING
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
Promote Your Business While
The DVA-2WA is a digital announcer with a built in
2 watt amplifier. Designed to provide music and
promotion on hold, the DVA-2WA can playback in
a continuous loop or alternate between promotions
and an auxiliary music source in timed intervals.
Any number of multiple messages may be
recorded.
The announcer comes with four professionally pre-
recorded promotion on hold messages, a power
supply and cabling for an easy plug and play
installation.
The output of the DVA-2WA may also be
connected directly to loudspeakers for repeated
messages or played at the push of a button for
museum displays, information booths, point of
interest locations, retail applications, etc.
Features
• 7.5 minutes of user recordable memory
• Select from user recorded messages or four pre-recorded
on-hold pacifier messages
• Three playback options: on demand, continuous loop and
timed intervals
• Non-volatile memory (no batteries required)
• Built-in 2 watt amplifier will drive up to three 25AE Paging
Horns, 30AE Ceiling Speakers or equivalent
• Record from electret mic, carbon handset, tape, CD, PC
sound card or any line level device
• Monitor recording from a standard handset
• 600 ohm audio output for high wattage amplifiers
• Multiple message capabilities (total number of messages
limited to 250 or the maximum record time)
• AGC (Automatic Gain Control) for trouble free recording
• Auxiliary audio (MOH) input for background music between
messages
• Remote trigger input for on-demand playback from a remote
contact closure
• Press and hold play mode
• Status LED for record and playback indication
• Master and auxiliary input volume controls
• I.O. (Input/Output) communications port (allows only one
DVA-2WA to announce at a time)
www.VikingElectronics.com
Information: 715-386-8861
PRODUCT MANUAL
Customers Hold and more ...
The DVA-2WA's non-volatile memory eliminates
the need for batteries or costly built in tape decks.
This provides the convenience of recording at the
shop or professional studio and then shipping to
the installation site.
Applications
• On-hold promotion messages and background-music
• Non-volatile message repeater for...
- Museum and information displays
- Car rental "Leave the keys in the ignition..."
- Airport "Loading and unloading only..."
- Smoking "This is a non-smoking building..."
- Amusement Parks "Please keep your hands in the
vehicle at all times..."
- Retail "Blue light special in aisle 5..."
Specifications
Power: 120V AC/12V DC, 500mA adapter provided
Dimensions: 5.25" x 3.5" x 1.75" (133mm x 89mm x 44mm)
Shipping Weight: 2.2 lbs (1.0 kg )
Environmental: 32°F to 90°F (0°C to 32°C) with 5% to 95%
non-condensing humidity
Frequency Response: 100-3.4KHz
Sampling Rate: 64K (equivalent)
User Message Length: 7.5 minutes maximum
Recording Audio Input Level: 30mV - 1.0V RMS (AGC
range)
600 Ohm Audio Output Level: 0.3V RMS maximum (across
a 600 ohm load)
Speaker Output Power: 2 watt peak
Connections: (1) 6-position cage clamp terminal block, (3)
3mm (1/8") audio jacks, (1) handset jack
Pre-recorded Pacifier Message Length: 30 seconds total
Minimum Speaker Impedance: 2.66 Ohms: (3) 8-Ohm
speakers in parallel
I.O. Com Wire Run Length: 1000 ft maximum (24 AWG)
Remote Trigger Wire Run Length: 4000 ft maximum (24
AWG)
DVA-2WA
Digital Voice Announcer
with Built-In Amplifier
March 7, 2018