Time Zone Settings - Viking PA-250-IP Product Manual

28. Import / Export
The Import/Export feature is useful for backing up all the PA-250-IP's programming or for importing programming when installing
multiple units with a majority of the same programming.
29. Clear Unit Settings
Clicking on the "Clear Unit Settings" button in programming will reset all of the programming features back to their factory default
settings, including setting the unit's security code back to the default value (845464).
NOTE: This command will not change or reset your IP settings or Multicast paging settings.
30. Clear IP Settings
Clicking on the "Clear IP Settings" will reset all of the IP settings back to their factory default settings. This also clears Multicast IP
address / port settings and erases any username and password programmed in the unit to restrict access to programming.
31. Night Ring Timed Operation
When Night Ring Timed Operation is enabled, if a SIP call is received during the programmed Start and Stop times, the PA-250-IP
will output loud ring on the "Line Out" and "Speaker Out" terminals. This is selectable for each day of the week. When outside of
the Night Ring timing window, the Inbound Call Mode setting will determine how SIP calls are handled. The Night Ring feature can
also be enabled by providing a contact closure to the trigger input on the PA-250-IP. All inbound SIP calls will cause the PA-250-IP
to loud ring when the trigger input is shorted. NOTE: For timed Night Ringing the unit must be synced with a time server. If the Night
Ringing feature is enabled in the software you will be asked to use Viking's Time Server when changes are applied. The address
will be entered by the software automatically.

32. Time Zone Settings

When using the Night Ring Timed Operation, the PA-250-IP must be synced with the network time. Set the Time Zone Settings to
match the settings on the network the unit is connected to for proper timed operation.
19