Features Overview; Installation - Viking PA-2A Product Manual

Paging Volume
MIN
120V AC
13.8V AC
Adapter
(included)
C.O. Line or Analog
PABX/KSU Station
A. Amplified Loud Paging
1. Paging Port
Move the TALK BATTERY DIP switch
Step 1
to the OFF position (DIP switch 4).
Connect pins 5 and 6 to the paging
Step 2
port output.
Note: For information on speakers to use,
ambient noise levels, and speaker wiring, see
DOD 498 and 895.
2. Trunk/Line Port
Step 1 Move the TALK BATTERY DIP switch to the ON position (DIP switch 4).
Step 2 Move the AUDIO LOADING switch to the OFF position (DIP switch 5).
Step 3 Connect pins 5 and 6 to an unused telephone line input (trunk port).
Step 4 Background music may be added as shown, the music level will be greatly reduced during page.
Note: For information on speakers to use, ambient noise levels, and speaker wiring, see DOD# 498 and 895.
VIKING
PAGING
VOLUME
MIN MAX
PAGING - LOUD RINGING
RINGING LINES
1 - 3 4 - 6
2

Features Overview

VIKING
MAX
RINGING LINES
1 - 3
Lines 1, 2 and 3
Lines 4, 5 and 6
MODEL PA-2A
©
RINGING
VOLUME
VIKING
ELECTRONICS
HUDSON, WI 54016
MIN MAX
AMPLIFIER SYSTEM
1 2 3 4 5 1 2 3 4 5 6 7 8 9 10
PWR
MODEL PA-2A
©
PAGING
VOLUME
VIKING
ELECTRONICS
HUDSON, WI 54016
MIN MAX
PAGING - LOUD RINGING
AMPLIFIER SYSTEM
4 - 6 1 2 3 4 5 1 2 3 4 5 6

Installation

VIKING
PAGING
VOLUME
MIN
RINGING LINES
1 - 3
25AE
Paging
Horn
(included)
RINGING
VOLUME
MIN MAX
7 8 9 10
PWR
Paging Port or
Unused Telephone Line
Input (Trunk Port)
MODEL PA-2A
©
RINGING
VOLUME
VIKING
ELECTRONICS
HUDSON, WI 54016
MAX MIN MAX
PAGING - LOUD RINGING
AMPLIFIER SYSTEM
4 - 6 1 2 3 4 5 1 2 3 4 5 6 7 8 9 10
PWR
To Paging Port
(2) 10K
Resistors
(included)
Ringing Volume
MIN
MAX
Power LED
25AE Paging Horn
(included)
25AE Paging Horn
(included)
Background
Music Source
Unused Telephone
Line Input
(Trunk Port)