Traffic/Security Filters
Filter Types and Operation
ProCurve(config)# filter source-port named-filter accounting forward 8,12,13
ProCurve(config)# filter source-port named-filter no-incoming-web drop 8,12,13
ProCurve(config)#
ProCurve(config)# show filter source-port
Tra ffic/Security Filters
Fil ter Name
--- ----------------- + ----- --------------- + --------------------------
web -only
acc onting
no- incoming-web
ProCurve(config)#
ProCurve(config)# no filter source-port 8,12,13
ProCurve(config)# filter source-port 8,12,13 named-filter accounting
ProCurve(config)#
ProCurve(config)# show filter source-port
Traffi c/Security Filters
Filter Name
------ -------------- + -------------------- + --------------------------
web-on ly
accoun ting
no-inc oming-web
ProCurve(config)#
9-14
The following revisions to the named source-port filter definitions maintain
the desired network traffic management, as shown in the Action column of the
show command.
| Port
List
| 2-6 ,8-9,12-26
| 7,1 0-11
| 1
We next apply the updated named source-port filters to the appropriate switch
ports. As a port can only have one source-port filter (named or not named),
before applying the new named source-port filters we first remove the existing
source-port filters on the port.
The named source-port filters now manage traffic on the switch ports as
shown below, using the show filter source-port command.
|
Port List
|
2-6,9,14-26
|
7-8,10-13
| 1
| Acti on
| drop
2-26
| drop
1-6,9,14-26
| drop
7-8,10-13
| A
ction
| d
rop 2-26
| d
rop 1-6,9,14-26
| d
rop 7-8,10-13